ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 KM400                      ) @ 0x000f7240
ACPI: RSDT (v001 KM400  AWRDACPI 16944.11825) @ 0x0fff3000
ACPI: FADT (v001 KM400  AWRDACPI 16944.11825) @ 0x0fff3040
ACPI: MADT (v001 KM400  AWRDACPI 16944.11825) @ 0x0fff8100
ACPI: DSDT (v001 KT600  AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0])
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: ro root=/dev/hda6 hdc=ide-scsi
ide_setup: hdc=ide-scsi
CPU#0: Initializing
Detected 1666.423 MHz processor.
Console: colour VGA+ 80x60
CPU#0: Calibrating delay loop... 3301.37 BogoMIPS
Memory: 254184k/262080k available (1173k kernel code, 5464k reserved, -1554k data, 124k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU#0: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU#0: L2 Cache: 256K (64 bytes/line)
CPU#0: Intel machine check architecture supported.
CPU#0: Intel machine check reporting enabled.
CPU#0:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU#0:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU#0: AMD Athlon(tm) XP 2000+ stepping 00
CPU#0: Enabling fast FPU save and restore... done.
CPU#0: Enabling unmasked SIMD FPU exception support... done.
CPU#0: Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
HZ: Currently used kernel timer frequency is: 500 HZ
RMAP: reverse mapping based VM v15j initialized. (C) 2003, Rik van Riel.
LOWLAT: Kernel low latency fixes enabled. (C) 2003, Andrea Arcangeli.
MEMPOOL: Memory Pools disabled. Copyright (C) 2001, Ingo Molnar.
PREEMPT: Kernel preemption enabled. (C) 2003, Robert Love.
ELEVATOR: read_latency: 128 - write_latency: 256 - max_bomb_segments: 0.
ELEVATOR: You are using the Low Latency Elevator. Fasten your seat belt :)
SCHEDULER: New ultra-scalable O(1) scheduler initialized. (C) 2002, Ingo Molnar.
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030509
PCI: PCI BIOS revision 2.10 entry at 0xfbae0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12, enabled at IRQ 5)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20, disabled)
ACPI: PCI Interrupt Link [ALKB] (IRQs 21, disabled)
ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled)
ACPI: PCI Interrupt Link [ALKD] (IRQs 23, disabled)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 0
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 0
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 0
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 0
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 0
IOAPIC[0]: Set PCI routing entry (2-16 -> 0x39 -> IRQ 16)
00:00:08[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0x41 -> IRQ 17)
00:00:08[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0x49 -> IRQ 18)
00:00:08[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0x51 -> IRQ 19)
00:00:08[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-18 already programmed
Pin 2-18 already programmed
Pin 2-18 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-17 already programmed
Pin 2-17 already programmed
Pin 2-17 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
PCI: No IRQ known for interrupt pin A of device 00:10.0
PCI: No IRQ known for interrupt pin B of device 00:10.1
PCI: No IRQ known for interrupt pin C of device 00:10.2
PCI: No IRQ known for interrupt pin D of device 00:10.3
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, use option 'pci=noacpi' or 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Starting kscand
Starting kinoded
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 16380
aio_setup: sizeof(struct page) = 52
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
VP_IDE: default first interface base=0x01f0, second interface base=0x170
    ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD400BB-00DEA0, ATA DISK drive
hdc: SAMSUNG CDRW/DVD SM-332B, ATAPI Optical Disc drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c017ab04, I/O limit 4095Mb (mask 0xffffffff)
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 124k freed
Adding Swap: 658656k swap-space (priority -1)
EXT3 FS 2.4-0.9.19-tuned-htree-orlov, 14. March 2003 on ide0(3,6), internal journal
Linux Tulip driver version 0.9.15-pre12 (Nov 11, 2002)
tulip0: 21041 Media table, default media 0800 (Autosense).
tulip0:  21041 media #0, 10baseT.
tulip0:  21041 media #1, 10base2.
tulip0:  21041 media #4, 10baseT-FDX.
eth0: Digital DC21041 Tulip rev 33 at 0xd000, 21041 mode, 00:40:33:99:07:D3, IRQ 17.
via-rhine.c:v1.10-LK1.1.17  March-1-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: SAMSUNG   Model: CDRW/DVD SM-332B  Rev: T404
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
i2c-core.o: i2c core module version 2.8.0 (20030714)
i2c-dev.o: i2c /dev entries driver module version 2.8.0 (20030714)
Linux video capture interface: v1.00
bttv: driver version 0.7.106 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 1106:3205 (VIA Technologies, Inc.)
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 00:08.0, irq: 16, latency: 32, mmio: 0xef002000
bttv0: detected: FlyVideo 98EZ (LR51)/ CyberMail AV [card=71], PCI subsystem ID is 1851:1851
bttv0: using: BT878(Lifeview FlyVideo 98EZ ) [card=71,autodetected]
i2c-dev.o: Registered 'bt848 #0' as minor 0
bttv0: FlyVideo Radio=no  RemoteControl=no  Tuner=4 gpio=0x007fff
bttv0: FlyVideo  LR90=no  tda9821/tda9820=no  capture_only=yes
bttv0: using tuner=4
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: probing bt848 #0 i2c adapter [id=0x10005]
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
btaudio: driver version 0.7 loaded [digital+analog]
btaudio: Bt878 (rev 2) at 00:08.1, irq: 16, latency: 32, mmio: 0xef000000
btaudio: using card config "default"
btaudio: registered device dsp1 [digital]
btaudio: registered device dsp2 [analog]
btaudio: registered device mixer1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:02:55 Oct 12 2003
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin A of device 00:10.0
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin B of device 00:10.1
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin C of device 00:10.2
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19-tuned-htree-orlov, 14. March 2003 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub.c: new USB device 00:10.0-1, assigned address 2
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb1:2.0
hub.c: new USB device 00:10.1-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
Real Time Clock Driver v1.10e
hub.c: new USB device 00:10.1-1.3, assigned address 3
usb.c: USB device 3 (vend/prod 0xb30/0x5) is not claimed by any active driver.
eth0: No 21041 10baseT link beat, Media switched to 10base2.
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor:           Model:                   Rev:     
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
queue 0: low latency mode is now on
queue 0: max queue sectors is now 8192
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
[drm] Initialized radeon 1.9.0 20020828 on minor 0
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:radeon_unlock] *ERROR* Process 1646 using kernel context 0
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21041 transmit timed out, status fc670045, CSR12 000021c4, CSR13 ffffef09, CSR14 fffff7fd, resetting...
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:radeon_unlock] *ERROR* Process 1666 using kernel context 0
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21041 transmit timed out, status fc678147, CSR12 000021c4, CSR13 ffffef09, CSR14 fffff7fd, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21041 transmit timed out, status fc678147, CSR12 000021c4, CSR13 ffffef09, CSR14 fffff7fd, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21041 transmit timed out, status fc678147, CSR12 000021c4, CSR13 ffffef09, CSR14 fffff7fd, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21041 transmit timed out, status fc678147, CSR12 000021c4, CSR13 ffffef09, CSR14 fffff7fd, resetting...